Weidmuller WI-MOD-E-G Manual de usuario descargar pdf (Pagina 24)

Accessories

WI-ANT-DPL-0-16

Dipole Antenna

WI-ANT-DPL-2-6-54

Whip Antenna

WI-ANT-DEMO-900

Whip Antenna

WI-ANT-CLR-900-5-32

5dB Collinear Antenna

WI-ANT-CLR-900-8-54

8dB Collinear Antenna

869/900 MHz ANTENNAS

-2dB Whip Antenna WI-ANT-DEMO-900

The WI-ANT-DEMO-900 is a quarter-wave whip antenna. It can be used for short

distance applications, where the wireless unit and antenna are mounted inside a

non-metallic enclosure.

As the whip antenna is “ground-dependent”, the gain and distance depends on the

installation environment.

Type Part No.

WI-ANT-DEMO-900 6720005089

-2dB Whip Antenna WI-ANT-DPL-2-6-54

The WI-ANT-DPL-2-6-54 whip antennas are suitable for the 900MHz products. These

antennas have less gain than the WI-ANT-DPL-0-16 however are smaller and are

preferred where space is tight.

The WI-ANT-DPL-2-6-54 is fitted with approximately 16 feet / 5 meters RG8 coaxial

cable and SMA male connector. Further coaxial extensions are not recommended with

this antenna.

The WI-ANT-DPL-2-6-54 is mounted from the base through a 3/8" (10mm) hole. This

compact antenna is designed for short range use only.

The antenna is suitable for internal or external mounting. This antenna may be used

on vehicles with a suitable bracket not supplied or when mounted in the panel work.

Type Part No.

WI-ANT-DPL-2-6-54 6720005086

0dB Dipole Antenna WI-ANT-DPL-0-16

The WI-ANT-DPL-0-16 is a ground independent half wave dipole suitable for the

900MHz products. It is a slimline, lightweight antenna that is easily mounted - this

antenna is the most common antenna used in applications within industrial plants or

factories.

The antenna has 15 feet / 5 meters of RG58 Cellfoil coaxial cable already terminated

with a crimped SMA male connector. This antenna should not be used with additional

lengths of coaxial cable - where longer lengths are required, used the WI-ANT-CLR-

900-5-32 antenna or higher gain antenna. This compact antenna is made for vertical

mounting. Correctly installed, this antenna will provide a net unity gain after allowing for

the loss of the attached coaxial cable. The pack includes a standard pole bracket and

clamps made from grade 304 stainless steel.

Type Part No.

WI-ANT-DPL-0-16 6720005080

5dB Collinear Antenna WI-ANT-CLR-900-5-32

The WI-ANT-CLR-900-5-32 collinear antenna may be used for external or internal

mounting. The WI-ANT-CLR-900-5-32 is a slimline, lightweight antenna that is easily

mounted. A short RG58 coaxial tail is terminated with a crimped N-Type female con-

nector. This compact antenna is made for vertical mounting clear from obstructions.

The pack includes a standard pole bracket made from grade 304 stainless steel

(included with the antenna).

Type Part No.

WI-ANT-CLR-900-5-32 6720005081

8dB Collinear Antenna WI-ANT-CLR-900-8-54

The WI-ANT-CLR-900-8-54 collinear antenna is a slimline, lightweight antenna which is

easily mounted, with a N-Type female connector. The WI-ANT-CLR-900-8-54 antenna

is mounted at the base tube by U bracket (WI-BR-CLR-KIT). This antenna is used

when maximum range is required or as a base station antenna.

Type Part No.

WI-ANT-CLR-900-8-54 6720005082

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Weidmuller WI-MOD-E-G Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Weidmuller WI-MOD-E-G