Weidmuller WI-MOD-E-G Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
22
WI-MOD-E-100
Ethernet 2.4GHz 100mW
Technical Data
Description: Ethernet
Embedded Protocols:
Serial
RS232 V.24 DCE
RS485
Discrete I/O
Input
Output
Networking
General Data
Operating Temperature
Humidity
Power Supply
Current Normal
Transmit
Approvals
Mounting
LED indication
Dimensions mm (in)
Weight
Wireless
Radio Transceiver
Transmit Power
Receiver sensitivity
Radio range
Antenna connection
Security
Configuration
Diagnostics
Ordering Data
10/100 BaseT RJ45, IEEE 802.3
Bridge/router functions work with all Ethernet protocols
TCP/IP, UDP ARP, PPP, ICMP, HTTP, FTP, TFTP, TELNET
1.2 to 115.2 Kb/s
1.2 to 115.2 Kb/s
Serial server, PPP, Modbus to Modbus TCP conversion
One I/O channel
voltage-free contact
FET 30VDC 500mA
Configurable as Access Point or Client, Bridge or Router
Point-to-Point, Point-to-Multipoint,
user configurable addressing
Repeater functionality
MAC Filtering – whitelist or blacklist.
Serial gateway TELNET
-35 to 65°C (-30 to 150°F)
99% non-condensing
9 – 30VDC, Current 240mA (12VDC), 150mA (24VDC)
FCC Part 15.247, CE ETS 300 328, RSS 210, Hazardous area
CSA Class 1 Div 2, IEC 60950
DIN rail mounting
Power / OK, Radio Rx and Tx, Radio Link, LAN link / Activity ,
Serial Activity, Digital I/O
115 x 141 x 32 (4.5 x 5.6 x 1.4)
< 0.4 kg / 0.8 lb
2.400 – 2.484GHz Direct Sequence Spread Spectrum (DSSS),
13 selectable zones
802.11b compliant, auto rate selection 1 Mb, 2Mb, 5.5Mb, 11Mb
100mW (20dBm), dependent on local regulations
96dBm @ 1MB/s, -91dBm @ 11Mb/s < 8% FER
1km @ 100mW
Range may be extended using repeater features
Dual SMA coaxial
128 bit AES encryption (WPA2), TKIP (WPA1) or +04 bit / 40 bit
WEP
MAC Address filtering
Password protected configuration
HTTP with remote configuration via wireless link
Web based system management - RF signal strength, Bit Error
Rate, connection monitoring and statistics
PPP Protocol Access to diagnostics
Firmware upgradeable via serial port
Type Part No.
WI-MOD-E-100 6720005052
WI-MOD-E-300
Ethernet 2.4GHz 300mW
10/100 BaseT RJ45, IEEE 802.3
Bridge/router functions work with all Ethernet protocols
TCP/IP, UDP ARP, PPP, ICMP, HTTP, FTP, TFTP, TELNET
1.2 to 115.2 Kb/s
1.2 to 115.2 Kb/s
Serial server, PPP, Modbus to Modbus TCP conversion
One I/O channel
voltage-free contact
FET 30VDC 500mA
Configurable as Access Point or Client, Bridge or Router
Point-to-Point, Point-to-Multipoint,
user configurable addressing
Repeater functionality
MAC Filtering – whitelist or blacklist.
Serial gateway TELNET
-35 to 65°C (-30 to 150°F)
99% non-condensing
9 – 30VDC, Current 240mA (12VDC), 150mA (24VDC)
FCC Part 15.247, CE ETS 300 328, RSS 210, Hazardous area
CSA Class 1 Div 2, IEC 60950
DIN rail mounting
Power / OK, Radio Rx and Tx, Radio Link, LAN link / Activity ,
Serial Activity, Digital I/O
115 x 141 x 32 (4.5 x 5.6 x 1.4)
< 0.4 kg / 0.8 lb
2.400 – 2.484GHz Direct Sequence Spread Spectrum (DSSS),
13 selectable zones
802.11b compliant, auto rate selection 1 Mb, 2Mb, 5.5Mb, 11Mb
300mW (25dBm), dependent on local regulations
96dBm @ 1MB/s, -91dBm @ 11Mb/s < 8% FER
3 miles @ 300mW
Range may be extended using repeater features
Dual SMA coaxial
128 bit AES encryption (WPA2), TKIP (WPA1) or +04 bit / 40 bit
WEP
MAC Address filtering
Password protected configuration
HTTP with remote configuration via wireless link
Web based system management - RF signal strength, Bit Error
Rate, connection monitoring and statistics
PPP Protocol Access to diagnostics
Firmware upgradeable via serial port
Type Part No.
WI-MOD-E-300 6720005053
Wireless Data Modems—Product Data 2.4 GHz
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios