Weidmuller WAVE Analog PRO Frequency Manual de usuario descargar pdf (Pagina 5)

Set upper measurement frequency via the DIP switches S1 and S2.1, S2.2

(see table).

Connect the module to the power supply to save the frequency.

– Select operating mode "fmin...fmax". S2.3 = 0 and S2.4 = 1

– Set upper measurement frequency via the DIP switches S1

and S2.1, S2.2 (see table).

– Ready!

Setting the input range using a frequency generator:

– Select the switch setting for saving the min. frequency

S2.1=0; S2.2=1; S2.3=1 and S2.4=1

– Apply min. frequency to the module

– Connect the module to the power supply.

– The LED lights up when the input frequency is measured.

The frequency has been saved when the LED goes out;

the module can be disconnected from the power supply.

– Repeat the process with the max. frequency: S2.1=1;

S2.2=0; S2.3=1 and S2.4=1.

– Select special range: S2.1=1; S2.2=1; S2.3=1 and S2.4=1

– Ready!

1 2 3 4 5 6 7 8 9 10 ... 14 15

Sin comentarios

Weidmuller WAVE Analog PRO Frequency Manual de usuario Pagina 5