Weidmuller UPIR - Analog to frequency converter Manual de usuario descargar pdf (Pagina 19)

Connections

Strip wires to 7 mm from the ends. Use a suitable ferrule for multi-

stranded wires (do not solder).

Use 12-28 AWG Cu Wire rated for temperatures above 70 °C Only,

tighten to 4.5 lb-In.

For effective protection from electromagnetic noise, all signal cables

must be shielded, or located on conductive trays or in conduits.

Terminal Signal

24 V DC (out)

Input signals

Current +

Common −

Voltage +

Not used

Link to change the set-up Security Link

9 Neutral (−)

Power supply

10 Live (+)

11 Normally Closed

Alarm Channel One

12 Common

13 Normally Open

14 Normally Closed

Alarm Channel Two

15 Common

16 Normally Open

Case Earthing is via a stud on lower side of case

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sin comentarios

Weidmuller UPIR - Analog to frequency converter Manual de usuario Pagina 19