Weidmuller XFAR - Universal glavanically isolated signal conv Manual de usuario descargar pdf (Pagina 17)

Power Supply Requirements

Check the power supply against the model number before applying

power to the instrument. Units must be used with the specified mains

supply, ratings are as follows:

Voltage Range Nominal Voltage Power Frequency

100–132 V AC 110 V AC 6 VA 47-63 Hz

200–264 V AC 240 V AC 6 VA 47-63 Hz

12–50 V DC* 24 V DC 5 W (at 24 V DC) -

*Using a DC power supply that provides this voltage will comply with

the instrument’s UL/CSA listing.

Connections

Strip wires to 7 mm from the ends. Use a suitable ferrule for multi-

stranded wires (do not solder).

Use 12-28 AWG Cu Wire rated for temperatures above 70 °C Only,

tighten to 4.5 lb-In.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

Weidmuller XFAR - Universal glavanically isolated signal conv Manual de usuario Pagina 17