Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1 Manual de usuario Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 108
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 70 of 108

Unit sensitivities indicate the change required in an analog input for the WI-I/O 9-L-T to detect
a state change and trigger any mapping that includes the input.
If you set the sensitivity to a small value, the mappings using the input will trigger on a small
change of value. If the input is noisy or variable, this can congest the radio channel by
sending multiple spurious messages. You can overcome this situation by increasing the
sensitivity value.
To set unit sensitivities:
1. Open the project.
2. Select the unit you want to change.
3. Select Sensitivities
4. WI Series shows the sensitivities for the unit:
5. Select the sensitivity you want to change and click Edit Sensitivities .
6. WI Series shows the sensitivity:
7. Set the sensitivity as required and click OK to set the new value or click Cancel
to return to the sensitivity list without changing the sensitivity.
8. WI Series will write the new sensitivity value to the module when you reconfigure it.
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 107 108

Comentarios a estos manuales

Sin comentarios