Weidmuller IE-GPRS-I/O Manual de usuario descargar pdf (Pagina 5)

Power Supply

The IE-GPRS-IO can be supplied with either 10 to 36 V DC or 8 to 24 V AC. Power input is approx.

10 W.

Electrical voltage

Connection to the electrical supply system must be carried out by a qualified

electrician.

Power must be supplied via a power supply unit in accordance with DIN EN 60

742 (VDE 0551)

The mains supply side must be fused.

Use only the cables supplied to connect up the device.

On the bottom rear end a connection to functional earth is recommended.

This connection is recommended by a 4 mm² cable with a 6.3 female spade

terminal, the IE-GPRS-IO has the male spade terminal.

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Weidmuller IE-GPRS-I/O Manual de usuario Pagina 5