
Industrial Modbus Gateway
Page 2
Subject to technical alterations without notice • Printed in Australia • DS61004007 • 03/2010
Technical Data
Ethernet Connections
Connector 8-pin RJ-45 Cat 5 socket with shield connection
Physical & Data Link Layer Layer IEEE 802.3i 10BASE-T
Isolation 1.5 kV galvanic
Speed 10 Mbit/s, half-duplex
Max. cable length 100 m
Ethernet frame types 802.3
Protocols Modbus/TCP slave, HTTP, IP, TCP, ARP
Concurrent connections 2 Modbus/TCP slave, 2 HTTP
Modbus RS-485 port
Connector 6-pin pluggable terminal block
Physical layer EIA-485-A, 2-wire
Isolation Non-isolated
Speed (bps) 300, 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200
Max. number of nodes 32
Protocols Modbus RTU master
Modbus RS-232 port
Connector male 9-pin sub-D, DTE, EIA-574 pin-out
Physical layer EIA-232-F
Isolation Non-isolated
Signals *RXD, *TXD, RTS, CTS, DTR, DSR, DCD, RI
Speed (bps) 300, 600, 1200, 2400, 4800, *9600, 19200, 57600, 115200
Protocols Modbus RTU master / *ASCI Terminal
*when used as diagnostic port
Indication
Type LED indicators: Power (green), Ethernet link (green), 2 status
(bi-color red/green)
Power Supply
Connection 2-pin pluggable terminal block header (Mini Combicon)
Supply voltage (others on request) 10-30 Vdc
Current 30mA typical @ 24 Vdc
Power Consumption 750mW
General
Storage temperature -25 to +85 °C
Operating temperature 0 to 60 °C
Relative humidity 10% to 95% (non-condensing)
Operating Enviroment Free from corrosive gas, minimal dust
Housing
Type Self-extinguishing PC/ABS blend (UL 94-V0)
Dimensions 101 x 22.5 x 120 mm (H x W x D)
Mounting / Rating / Classifi cation DIN Rail mount / IP 20 / NEMA Type 1
Weight 0.12kg
Ordering Information Order as
SL-MOD-GW 7940086485
Features
The SL-MOD-GW gateway provides the following key features:
• Modbus/TCP protocol (Ethernet)
• Modbus RTU protocol (either RS-232 or RS-485, software
confi gurable)
• Support of Modbus function codes 03, 04, 06 and 16
• Embedded web server for easy confi guration and
commissioning using a web browser
• Firmware upgradeable via Ethernet
• DIN rail mountable
• 24 V DC (10-30 V) power supply
• Status LEDs for power, Ethernet link, device status and
communication status
The SL-MOD-GW incorporates an embedded web server. This
allows you to connect to the device and monitor and configure it
using a web browser.
Comentarios a estos manuales